In the actual first public PTU patch 3.3.0 PTU.958272 you can visit already a place holder planet Hurston. It is in a very early stage, but you can traverse already the atmosphere, which starts at approx. 100km. The entry-effect starts at ~ 100 km and ends at 60 km. The bright areas what you can see is a cloud layer which is approx. 10km above the surface. In the morning I visit it first time, after I got the tip from another Star Citizen how to travel. Because I found no detailed thread about a guideline to travel to Hurston, I am creating this for our brave explorers. Credits for this approach goes to other Star Citizens, who developed this approach. The idea is to travel to Lagrange Point HUR L1. Because HUR L1 and HUR L2 are on a straight line, where Hurston is in between, you need to stop the QT by shutting down the power approx. 500.000 km away from HUR L1. Then you start to travel to HUR L2 , where you interrupt your QT again before you arrive. While you are repeatingly doing this approach, you are getting closer to Planet Hurston in the middle between both Lagrange points. According some other Star Citizen, you are going to die, when you exit the ship after landing. So stay in your ship. I noticed a water/ocean sound, when I landed approx. at - 300m. You can notice a bluish color in the last picture. So I assume that I landed under water. But I could not notice a defined water surface. Below some pictures. I forgot to made pictures in the morning during the landing process. I just got some during the procedure to get closer and after landing. But I am working on a second try, where I will make pictures during flying through the atmosphere. So I will add more pictures later. Have fun to try it too. Thanks CIG for this little easter egg :slightly_smiling_face: EDIT: For those who do not want to read through this thread here also some theory: So, I caluclated the exact interrupt points when you travel from Port Olisar to HUR L1 and then from this point to Hurston. In theory you could do this in 2 jumps. In reality you will never be able to interrupt power so precise that you land directly on the surface of the planet. But here are the results: From Port Olisar to HUR L1 starmap shows a distance of 33.203.496 km. You have to interrupt before you reach a distance to HUR L1 of 29.368 km, in order to be able to still jump into direction of HUR L2 without that Hurston itself is blocking the QT path. From this first interruption point you QT to HUR L2 and interrupt before you reach a distance of 1.285.229 km to HUR L2. In theory you would land direct on the surface :wink: BTW: according Citcon presentation Hurston has a diameter of 2.370 km EDIT 2: The theoretic value of 29.368km is to close. In reality Hurston blocks already the QT path to HUR L2. But it works with 50.000 to 60.000 km before HUR L1.