Hey guys, many of you may have the same problems i had to get the game running. I´ve done a lot research and testing, so i wanted to share this with you. As you can see, my system is not the newest, so before improving, i had trouble to get 10fps. After the improvements, i am able to play the game at 15-25fps. (Up to 50 in Singleplayer) *NOTICE THAT MORE THAN 25 FRAMES ARE BARELY POSSIBLE IN UNIVERSE AT THE MOMENT! This guide IS for GUYS LIKE ME - Who dont have a modern PC but still want to play it.. I wouldnt be able without all this... I also know that much of u are able to google a bit and find the same, but much are not! System spec: Phenom2 965 @ 3,8ghz (OC), HD7950 OC, 16GB RAM, SSD, Xonar D2X EDIT.: You can see the quality & performance in the video above... Steps to improve SC Performance: 1. Theres a bug with the multicore assistance. If you go to your Ressource Manager and look at the cores while loading into universe, there could be one core at 100% or atleast much higher than the others. If that is happening, go back to taskmanager, click on details, rightclick Star Citizen, go to CPU affinity, then disable the core wich is at 100% and click ok. Now you can reenable it again. This should fix this bug for the whole gamesession (until SC gets closed or crashes) 2. Write a user.cfg to set specific grafic settings according to the strengh of your graficcard: You can find a very nice guide for that here: https://www.redacted.tv/custom-user-cfg-guide-star-citizen-alpha-2-x/ 3. Unpark your CPU´s Use the "CoreParkingManager" for that. You can find a very nice guide for that here: https://www.redacted.tv/how-to-set-up-star-citizen-performance-guide/ 4. Im using a program called "Process Lasso" to get the last bit of power out of my cpu. This program makes it also easier to fix nr.1 since you have to do it at each launch of the game and with Process Lasso im much faster in it than with the taskmanager. You can download it here: https://bitsum.com/ 5. Of course (As you see in the Top) i have also overclocked my CPU&GPU to get more power out of it. I strongly recommend to not do that if you dont know what you do, especially if you have stock coolers in your PC. My Phenom is running at 200Mhz with a Multiplicator of 19. I also had to increase the core-voltage to ~1.5 to get it stable. That got me to 3800Mhz (x4) wich is barely able to run the game Atleast here is my personal user.cfg guide: Further down are the lowest settings for a 3gb graficcard. You should set the same grafic solution your are using at windows at "r_width"&"r_height". If you got less than 3gb graficcard, lower the textures& shadows pool size to 256&128. If you got more than 3gb graficcard, higher it to 1024&512 Now you have to test a bit: open fraps and look how much fps you get without/with the cfg. If you have still over 25 frames, you can set "r_ssdo" to 1 and "e_LodRatio" = Level of Detail to 10 (max 40) As next improvement you can kick in the Antializing up to 8x. (r_AntialiasingMode = 1, r_TexMaxAnisotropy = 8, r_TexMinAnisotropy = 8; ) Another improvent of the look is too higher the "e_ShadowsReScale" up to 40. The last increases in quality you can set are "r_SSReflections" and "GsmCache" to 1 and "r_Sharpening = 0.0" to 0.4 (max 1.0) - but all that really needs a lot of power so you´ll need a quite better cpu/gpu than me for that! Just test it! User.cfg (copy into .txt -> rename into .cfg -> move into sc folder) Con_Restricted = 0 sys_spec = 1 sys_maxfps = 120 r_VSync = 0 r_MotionBlur = 0 r_TexturesStreamPoolSize = 512 e_ShadowsPoolSize = 256 e_ShadowsMaxTexRes = 128 e_ShadowsReScale = 0,1 e_GsmCache = 0 r_ssdo = 0 r_ssao = 0 e_LodRatio = 4 r_SilhouettePOM = 0 r_Sharpening = 0.0 i_Mouse_Accel = 0.0 i_Mouse_Smooth = 0.0 r_DepthOfField = 0 r_ShadowBlur = 0 g_radialBlur = 0 r_HDRBrightLevel = 0 r_HDRBloomRatio = 0 hud_bobHud = 0 r_SSReflections = 0 r_ColorGrading = 1 r_OpticsBloom = 0 r_AntialiasingMode = 0 r_TexMaxAnisotropy = 0 r_TexMinAnisotropy = 0 r_FullscreenWindow = 0 r_width = 1920 r_height = 1080 r_MultiThreaded = 1 r_ChromaticAberration = 0 e_Tessellation = 0 r_TessellationTriangleSize = 20 r_TessellationPreTesselateOnGPU = 2 e_Tesselation = 0 r_TesselationTriangleSize = 20 r_TesselationPreTesselateOnGPU = 2 Feel free to add your own experience to this topic :wink: /N0c