Well, after some intense work, the preliminary version is ready for show (printing parts as I write this). Please note that the top body is still preliminary and has no decorations or detail other than a final-ish shape. Of course it's not a 100% faithful reproduction but for the sake of usability, ease of fabrication and print, it's a compromise between the space needed by the motherboard and the mobiglass models that float around. Making it an exact 100% copy would be impractical, because they have a crapload of pieces that would fall apart after light use and I intend to wear it daily. The hardest aesthetic deviation is the latch, I really like fidlock and I'll die on that hill. I will release the hounds firmware and the 3D STEP files once finished in so anyone can do whatever. As per hardware, it is going to use a Lilygo T-Wristband, with color screen, accelerometer and Bluetooth. It was not cheap(60€ shipped, MUST be the version with Bluetooth AND accelerometer chips), but spinning my own board would have been even more expensive. The plan is to make it act as a keyboard you can bind actions to, and flick the wrist to switch between them (like, on wakeup the button opens the general mobiglass, but you can flick it to MAP, for example, and will open it as you click it's button. Run time is probably one session of gameplay, I am still unsure how big I can make the battery in it, so we will see. Here you can see the first tests (looks like a fitbit, tbh) but it was modeled from total scratch. First I needed to establish wearability, before I could model the best aproximation I could of a mobiglass, on top. Colors employed in these tests are NOT significative, I'm just using TPU (polyurethane) and PLA filament I had around. Final version will probably have PAH-CF body and matte black TPU straps. In any case, there is still a bit to go, especially for me in the firmware section, but I'll get there eventually. In the meantime, if anyone wants a detailed and more up to date source, here's my Mastodon thread: https://starcitizen.name/@Plus_Ultra/111312973321732282 EDIT: Adding the finished prints of today: The last photos answer to the strenght of the strap mounts (could be made stronger but as of now I see no point in that). It will work as bracelet for normal use cases no probs. Right now I am printing a modified version with a study on the decorative spheres (projectors? Cameras? whatever). I have added passages to light them up easily with a led, just in case I want to. The 5mm glass spheres themselves are easy to source.