Hello All, I recently got 2 T16000's and a TRFP Rudder. While going through setups I noticed that there were tons of work arounds, including ensuring that only one joystick was plugged in, launching TARGET Gui, running the script, plugging in the rest of the hardware, then launching. I also noticed several problems with the Rudders which were not plug and play at all. Several of the binds were overlapping with the joystick binds and the pedals, which controlled velocity, would slowly drop in velocity despite no pressure being applied and the in-game binds being correct. Headaches abounded. I wanted a better solution so I spent about 5 hours patch-working a custom script. If you are running the same Dual T16000 + TFRP rudder setup I highly recommend you give it a try. Install Guide can be found here: https://docs.google.com/document/d/1aWrDZo7Wv9Mf-vWcvGAFR0DvrJpJg4ufq5cnhkrLdQY/edit?usp=sharing Script can be found here: https://docs.google.com/document/d/1zIK3jtIwxVdna0aQznCqwyexlOW1_oBwHhbYMl701zM/edit?usp=sharing If you have any questions I'll try to keep an eye on this thread.