Spent quite a few hours figuring out a good configuration for myself that is both ergonomically conscious, (not going to require me to fumble for buttons in flight), and functionally making use of important key-bindings, (imo) How I set this up: 1. Installed the drivers for the Throttle and Flight Stick, and installed T.A.R.G.E.T. Software. 2. Shutdown, connected Throttle and Flight Stick for the first time to my PC, (I picked it up on the 24th) 3. Configured T.A.R.G.E.T. Profile with both Flight Stick and Throttle selected, (This is important because the game will recognize them as separate devices if you don't put both in the same profile). 4. Configured Curves for all control Axes that I feel need some degree of softening. I used light deadzones and curves as shown below. 5. Change Throttle Analog Stick to Mouse X-Axis and Y-Axis in T.A.R.G.E.T., (very important step to avoid conflict with Main Throttle axis, and to make it more functional for Look) 6. Configured Key-Bindings shown below, eliminating all other bindings, (important step as combined binding in the same mode will cause those binding to function inconsistently as it is trying to tell the game to do 2 different things). Notes: (SM) indicates Bindings which function in Scanning Mode, shown in Bold. (IM) indicates Bindings which function in Interaction Mode, (not to be confused with Interactive Mode for Mouse Flight), shown in Italics. (DT) indicates Bindings which require a Double-Tap. Power +/- are to Increase or decrease power respectively. Horn in blue is for operation of ground vehicles, and (All) indicates Bindings which are set the same for Ground Vehicles and Space Ships. Some other Bindings like Map, (same as F2), also are set in both areas. This functions like Modes, but where Modes are selected, these are Vehicle dependent. Also, in order for the Throttle Analog to work correctly, and to avoid weird behavior when using the mouse for Interaction and MobiGlas, the Mouse is removed from Flight Controls by wiping those bindings, and set to be used only for Look/View, (i.e. for Interaction with mobiGlas or MFDs, or Freelook). Below: Flight Stick X-Axis, (same settings as Y-Axis) Below: Flight Stick Rudder Axis, (Twist Axis) Below: Throttle Rudder Axis I also added very light curves with only a minimal center deadzone to the Throttle analog stick on both axes, (not shown; 2 Center with Curve of 1 iirc), and set it to Mouse as it conflicts with the main throttle axis, (Y-Axis on the analog stick is the same). Below: Key-Bindings for my setup I thought I'd put this up in case anyone wants to look at it and see if it would work for them. I found no issues with setting this up in the game Advanced Coniguration for Key-Bindings, aside from those mentioned, and noting at one point that some inputs can't be bound to double-tap functionality. All of the regular buttons seem to allow double tap, but iirc some or all of the multi-input hat/DPAD style buttons do not allow it. Final note of caution: Make sure you clear everything else from your HOTAS configuration. The game has Advanced Camera bindings, Interaction bindings, and some others bound by default. Also note, I did not use any presets, but started from the basic, default binding. Hopefully someone will find this useful. There is also a thread for those that wish to set-up xml-style bindings, with a pre-configured set-up and instructions on how to make it work as well as make changes, to be found here in the Hardware section, (not by me), if you find that more useful or accommodating to your needs/interests.