It's not complicated, but in my case it's something new and I didn't know how to do it, This is a mini basic configuration to walk and control the ship as a mini basic guide for those who need it, there are 4 keys, the important thing is point 4, 1- create a new "Analog Movement Profile". 2- Put it in "Onboard Profiles", so you can load it with the designated key from the Wooting KB (MODE, A1, A2, A3). 3- The Profile is loaded on the keyboard and opens the settings on the screen, this is up to personal taste, each one can decorate it to their liking :slightly_smiling_face:, from here go to the "Gamepad" tab. 4- Gamepad, "Select Controller Type: X-Box Controller" -From "Controller Mapping" drag the controller you want to the keys you want to configure on the Wooting keyboard as analog keys. Left click and drag the gamepad controller to the position you want on the on-screen keyboard. Right click on the Wooting keyboard icon to delete the key", I've put 4 basic keys so you can see how they should look. What has worked for me to make Wooting work well with Star Citizen is to check "Game Map Override", if you don't check it it works but there are things that don't work well, the only thing to keep in mind is that when you check the "Game Map Override" box, the keys you use will be purely like a gamepad, if you use the SC chat you can't write with the keys you used as a Gamepad (in the example W,S,A,D), but this is not a problem with Wooting, the keyboard comes configured with 4 profiles, one of them for writing. If you have to write something in the chat, you change to profile 1, write whatever and then change to the profile you have for Star Citizen, the change is instantaneous and there are 4 slots for profiles and if you are going to talk a lot in the SC chat while you play I would leave Wooting as a normal keyboard. Point 5 is to add the analog keys that we have put in the Wooting profile in SC in the "Gamepad" section, to control what we want, in this case the ship and walking So far I have not found any problems with the configuration in SC :ok_hand: