Hello, im not quite sure if this is the right Subforum for my issue but i need to ask you guys something I just wanted to set my DRAM Frequency to the value they recommend (3300), but i realized fast that i couldnt run it on 33 so i set it to 3000 at least. system is kinda running but i get these weird audio crackling which made me try to set the PCH Voltage higher. Issue got better but im now at 1,15V PCH and still there is sound crackling sometimes am i missing something? can i try set PCH higher than 1,15 without damaging something? i5 6600k @ 4,4 with 1,3V (BCL 100) on an Z170a Board from Asus PCH Voltage now 1,15 (stock 1,05) with Corsair Dominator Platinum CMD16GX4M4B3300C16 @ 16-18-18-36 3000mhz on 1.35V (GTX1070) my initial goal was to set 3300mhz ram freq but with the xmp profile the pc wouldnt even start... can someone help me here?