Hey, so ive decided to get a set of dual alphas and been setting up the right stick with no issue everything is working. i then wanted to setup the left stick and here i ran into a weird issue, i wanted to set the y-axis to throttle forward / backwards, when i then push it forwards the ship goes backwards, however if i pull the stick backwards the ship allso goes backwards. i can invert the axis and it goes forwards when stick is pushed either forwards or backwards, same issues iam having with strafe left / right assigned to the x-axis, it either goes left or right (inverted) no matter if i push it in x- or x+ its like it only recognize is a one way axis, anyone had this issue and know how to solve it?