Last updated 06/10/2017 for StarCitizen v2.6.3 Here is a profile for the X56 Rhino. Original posting is here: https://forums.robertsspaceindustries.com/discussion/331452/x56-hotas-profile-for-star-citizen-v2-6-0/p1 Notable features and combination commands: Joystick analog click will do the following: lock/fire missiles in flight mode, engage quantum drive in quantum targeting mode. SW 1,3,5 on the throttle will slowly increase power to weapons, shields, avionics respectively and then reset all to equal when held for ~2 seconds. SW 6 on the throttle will toggle ESP when tapped, and swap your targeting between lead and lag PIPs when held for 1 second. TGL 4 UP will start self destruct countdown when held, and eject you when double-tapped. many more, see the image for commands. Download these two files: Star Citizen-X55-X56_V2.6.3-A.pr0: https://jaredkidd.com/nextcloud/index.php/s/KL5TeFe10cOgj8t X56-xamindar_V2.6.3-A.xml: https://jaredkidd.com/nextcloud/index.php/s/fI26OtBao0ugDYi Place the pr0 file in "C:\Users\Public\Documents\Mad Catz\X-56 Rhino" then right-click rhino icon in system tray and activate profile. Icon should now be green. Place the xml file in "\Cloud Imperium Games\StarCitizen\(Public or Test)\USER\Controls\Mappings". Default Star Citizen installation is now in the Program Files folder I believe. You will also want to save it somewhere else as it can get deleted with patches and when you clear out the USER folder. Launch Star Citizen and in options go to the "Keybinding" section, click "Advanced Controls Customization", and restore default config by selecting "Reset to defaults" before loading this profile. Next, select the "X56-Xamindar_V2.6.3-A" Control Profile. Note: keyboard is keyboard,mouse is mouse, first Joystick is usually your joystick, and second Joystick listed is usually your throttle (Joystick (1) - you have to scroll down to see it!). Some people have these reversed. If that is the case, just reset to defaults again and reload the profile making sure to swap the joystick mapping when you select your devices. If that still doesn't work, make sure you unplug all other controllers so you only have your X56 set connected. Mode Switch: Mode M1: General Flight and Combat Mode. Should be the most commonly used mode. Mode M2: Same as Mode 1. Mode S1: Ship systems, power and HUD settings. Note: Hold TGL4 up to enable/disable self destruct, Double-tap it up to eject. Hold TGL4 down to exit seat. Hold energy distribution SW1, 3, or 5 for ~2 seconds to reset the triangle. Hold SW6 for 1 second to toggle reticle mode. Thanks for any and all feedback and hope you enjoy using this! As always, suggestions are welcome! Mode M1: General Flight and Combat Mode. Should be the most commonly used mode: Mode S1: Ship systems, power and HUD settings: Landing Functions (all 3 modes): Changelog: Update 2017/06/10 - V2.6.3-A: Updated images for both modes. Cleaned up XML and pr0 file. Update 2016/12/31 - V2.6.0-B: Added new Mode S1 for ships systems (many new commands added to mode S1). Removed power and hud cycle from rotaries. Added power toggles and HUD navigation to Mode S1. Corrected some keybindings to CIG default and removed some legacy commands from XML. Removed accept/reject invite, added lights toggle back. Update 2016/12/25 - V2.6.0-A: moved quantum and landing toggles to TGL 1 (landing has been heavily simplified by CIG), separated afterburner and boost. Update 2016/06/26 - V2.4.0-D: Re-arranged many controls and added just about all that were missing - see the image. Added deadzones to xml for strafe controls. Update 2016/06/21 - V2.4.0-C: Corrected some default XML bindings. Fixed the following: Exit seat, eject (double tap), self destruct (hold). Added Strafe forward/Backward and Shield Top/Bottom to throttle HAT. New image showing key mappings. Update 2016/06/18 - Saitek V2.4.0-B: fixed strafe right on HAT command (this will be assigned something else later anyway). Update 2016/06/13 - V2.4.0-A: new versioning to follow game versions. Re-created XML with new 2.4 keyboard layout. Same for Saitek Profile. Update 2016/05/31 - V0.1: Initial release. Reassigned all buttons/controls in new Saitek software for X56. Added strafe and inversion settings to XML for throttle analog stick.