See changelog below for details. What are your most used buttons? Let me know, so I can optimize the setup. Feedback is strongly requested! HowTo: Download XML from GitHub: https://github.com/PaladinTitus/SC_X56/blob/master/SC_4-3-1_Eramur_x56.xml (see picture below) Copy XML to INSTALL_PATH\StarCitizen\LIVE\USER\Client\0\Controls\Mappings (or PTU if you want to) Get into the game Open console (^) Type "pp_rebindkeys SC_4-3-1_Eramur_x56" (do NOT append ".xml"!!!) - You can use copy & paste here for the file name (CONTROL + V) Confirm with ENTER Close console (^) Enjoy! Dedicated images for the different modes (General, Mining, Salvage) Bigger pictures? https://imgur.com/a/SjtVLUr Known Issues & possible solutions "My throttle is inverted" - This sadly is a problem with Windows and SC. Windows is responsible for the device allocation and SC (currently) has no intelligent way to handle it. So while for me the throttle is "Joystick/HOTAS 1" and the stick is "Joystick/HOTAS 2" this may vary for you. Especially if you have other gaming devices connected (wheel, vr headset, xbox controller...). Then they might even be 3,4 or 5 or just 1 & 2 but stick and throttle inverted. Make sure you have the right device selected when you change the inversion settings (see screenshots from my setup below). It's a bit try & error. "My ship won't move" - Please check the speed limiter and the acceleration limiter. If they are set to zero, your ship won't emit any thrust. "I'm having ghost inputs." - Please make sure your throttle and stick are connected to separate USB controllers. The X56 seems to consume a lot of bandwidth. Check your mainboard manual for this or (if possible) use USB 2.0 and USB 3.x as they have different controllers for sure! "My xml file is corrupted/invalid" - This seems to happen if it is donwloaded "the wrong way" (how ever that is possible). Please just create an empty textfile, copy & paste the content from git, rename the file "SC_3-XX-X_Eramur_x56.xml" (replace X with correct version number) and copy it in the correct folder. "My keybinds are not as intended" - Did you delete the user folder before loading the profile? Apparently SC does not clean the settings fully, so some keybinds won't get overwritten. Still not working? Please try this solution: Are both devices detected correctly? If you are not sure, please test here: https://html5gamepad.com/ (push a button on each device to make them visible) If they show up, try a different approach: Instead of loading the config via console, go to options - keybindings - advanced controls customization - control profiles and select "SC_3-23-1_Eramur_X56". In the opening window select: Keyboard -> Keyboard Mouse -> Mouse Joystick -> Joystick Joystick -> Joystick (1) Confirm with "Load". Changelog Update 19.09.2025 Update to 4.3.1 Fix VTOL toggle Change weapon groups (B1 fires group 2, button 5 fires group 3 now. Those are the default groups in the ship. Group 1 is selected by default, so you can see all weapons/ammo while firing the two groups) Update 27.12.2024 Update to 4.0_preview Fix speed limiter Update 22.05.2024 Update to 3.23.1 Fix inversion problems Fix ground vehicle controls