Hi all, just checking in to see if anyone else has encountered a similar issue and how to fix it. So I have set the space break on an axis (lever bar in Virpil Constellation Alpha), I have it configured with the correct inversion, all flies OK and breaks OK when I use the lever, however after releasing the space break, ship seems to get stuck until I press esc or rebind the key, it does not keep on slowing down (breaking) but does not accelerate, pitch and yaw works OK in this state. Physical lever is OK and checked, works correctly in tester. will try to upload some video to show case. It appears to be a recent issue, I have been using this setup for a while and only today started experiencing this issue.