Good Morning, I have been trying to get an old I5-3700k with a 1070ti to work with SC. The machine could run SC Hangar Module and early build of the PU with a GTX Titan. Years later I replaced the Titan with a spare 1070Ti and thought by myself let's fire up SC to see if it works. Now let me be clear I expected no more than 10-20 FPS. I check telemetry and my rig is around that spec and below the minimum spec. So I am not expecting 60 FPS or so. But I get into the menu and the FPS is so low that PowerPoint is quicker. The menu button doesn't react to my presses or like 10 seconds later. GPU usage is 1% during AC even. What I already did was disable the built-in GPU of the I5-3700k and used DDU to remove both Intel GPU and Nvidia GPU driver and install it fresh. No success. I reinstalled SC after completing wiping it. Still no success. I checked the logs but I can not find anything special in there. Other games do not have a problem. Does anybody have an idea ? I included a r_displayinfo 3 of the menu (this took 5 min to even type) Edit: Problem was a Citrix display driver