The following is the standard troubleshooting that we've been posting for years in the #helpdesk-volunteers channel They recently created a bunch of new error codes. We have confirmed that ERROR 732823393 is one of the errors that can be generated by pagefile issues, but probably not the only one. Standard troubleshooting for pagefile issues: ____________________________________________ Running out of virtual memory is a common cause of crashes and stuttering in the PU. Make sure your pagefile is enabled and on SSD(s) and only on SSD(s) - not on any HDDs (unless you don't have an SSD) http://www.thewindowsclub.com/increase-page-file-size-virtual-memory-windows I recommend you set your pagefile manually to at least 32768 initial and 32768 max on an SSD since you were having issues And make sure there's plenty of space on that drive even after the pagefile is configured. (You shouldn't fill an SSD more than 70% full) SC uses the pagefile to unpack graphical assets from the data archive before loading them into RAM and will crash if the pagefile gets full even with plenty of RAM available. Having a pagefile on any HDD (even if you also have it on an SSD) will cause stuttering as you move between areas in SC. (Though you still need a large pagefile even if you only have HDDs) ____________________________________________ Be sure to reboot after adjusting the pagefile