Without further noises. Let me start for a start with sharing the source material I based my measurements on followed in the end of the post with the measurements from the AutoCAD. Numbers in the measurements are in cm. There is approx 10% margin of error in my estimate because of perspective and somewhat lowish resolution images from the video screen captures. SOURCE IMAGES Measurements are based on estimating the door size from taking a screenshot of the Port Olistar spawn room door, figuring its about 1.4m wide and about 2.3m high. The measuring the hangar door size by scaling by the visible door size, measuring the height of the snorkel tower and then using the height of the snorkel tower to scale the side view of the carrack. MEASUREMENTS The numbers ~163m long (Edit: used to be 170m long but revised 7m downwards) ~34.5m high (Edit: used to be 36m high) ~64.5 m wide snub ship hangar door ~ 17 x 25.5 meters in size Seems a bit larger than I assumed it would be. Probably I have estimated it a bit too large. Should not be larger than maybe 160m because of port olistar large landing pad size Edit: Bonus image "new" carrack (scaled to ~163m) vs the "original" carrack (at 123.5m) side by side in the same scale. (Edit2: revised new carrack down to 163m, updated the comparison image)